The Perfect size and Shape of the Swage end of
tubes means a lot for proper drawing of tube. We offer swaging machines, rotary swaging machines, industrial swaging machines a forming process in which metal is formed by a rapid succession of hammer blows. It is chip less forming method which increase the grain structure and hardness of
material and elongate the point which reduce the metal loss.
Rotary swaging is the most economical method used for pointing
comparatively smaller diameter tubes in the metal tube manufacturing
industries for Drawing tubes, rods and wires.
STOKER
offer basically two Types of Rotary Swaging Machine for Tube Pointing.
- Two Jaw Type Rotary Swaging Machine : upto 30mm OD Tube.
- Four Jaw Type Rotary Swaging Machine : upto 90mm OD Tube.
The main structure of machine is compact and sturdy construction. Main body
of the machine and Fly wheel are mad from Steel cast and Spindle is made
from Forged steel. The main spindle is driven by electrical motor coupled to
flywheel. The hammer block and dies are mounted in the Spindle, blending the
rotary and gravity principle creates the regular and accurate stroke of dies
to the tubes. The dies are accurately tapered to pull in the tubes to reduce
manual effort.
©
Stoker Concast Pvt. Ltd. All Rights Reserved (Terms
of Use)